Configuring Various Codec Attributes
The following procedure describes how to configure various coder attributes such as bit rate.
|
➢
|
To configure codec attributes: |
|
1.
|
Open the Coder Settings page (Setup menu > Signaling & Media tab > Coders & Profiles folder > Coder Settings). |
|
2.
|
Configure the following parameters: |
|
❖
|
'AMR Payload Format' (AmrOctetAlignedEnable): Defines the AMR payload format type:
|
|
❖
|
'Opus Max Average Bitrate' (OpusMaxAverageBitRate): Defines the maximum average bit rate (in bps) for the Opus coder.
|
